How To Turn Off Fire Alarm In Building?

how to turn off fire alarm in building
0 Shares

Fire alarms are an essential component in buildings, homes, and apartments. They detect even the slightest smoke and alert people by ringing to hear even at a very long distance. However, we all must have faced the malfunctioning of these alarms. This may be in terms of ringing continuously or at some interval without any stimulus.

Therefore, in this article, we shall discuss the main causes behind your fire alarms working abnormally and how to turn off fire alarm immediately without creating chaos. Also, we shall point out some basic hacks and precautions that may help you avoid such a mishap. So, continue reading to learn all about false fire alarm ringing in no time.

Causes Behind The Malfunctioning Of The Fire Alarm

Your fire alarm may malfunction by either beeping continuously or with some break at an interval. Below are a few of the most common reasons behind ringing a fire alarm without any stimulus.

  • Old or low-powered batteries are the most common reason behind your fire alarm functioning abnormally.
  • Dirt, dust, or debris accumulation may disrupt the internal components inside the alarm and damage them.
  • Improper installation may also disturb the normal functioning of the fire alarm.
  • Environment factors such as humidity or smoke from the cooking may also stimulate, resulting in continuous beeping of the fire alarm.
  • Interruption with the main power source may also work as an abnormal stimulation for the fire detector.
  • A new fire detector may sometimes show such a problem and needs a bit of adjustment to work properly.

How To Turn Off The Fire Alarm In The Building?

Let’s walk through some of the easiest hacks that you may follow to turn off your fire alarm in buildings without panicking at all. However, before that, the first step is to detect the problem causing such a mishap. To do so, check the batteries, installation of the alarm, and main power source of the fire detector.

Change The Batteries Of The Fire Alarm

Old or low-powered batteries may disrupt the normal workup of the fire detectors, resulting in strange beeping. Most of this beeping is not continuous but at a proper interval which may annoy you to the core as you need to switch it off continuously. Therefore, to avoid this, check the batteries. Then, replace them with new ones.

Moreover, this short beeping may also occur with the normal batteries placed inappropriately. So, you may simply put them properly as there’s no need to change them up.

Clean Up The Fire Alarm

Excessive dirt and dust accumulate within the fire alarm. This accumulated debris damages the internal components resulting in slow yet irreversible deterioration of the detection. Therefore, it’s really essential to clean your notice regularly. To clean it up, follow the steps below:

  • The first step is to disconnect the alarm from the power source and remove the batteries.
  • Next, get a clean cloth and clean it up carefully.
  • You may simply use a vacuum cleaner as well, which is easier to use. However, make sure you don’t disrupt any of the internal components within.
  • Lastly, place the batteries again and close them up. Now test whether the beeping has stopped or not. If yes, then you have successfully done your work.

Reset The Fire Alarm

Resetting any of the electrical equipment helps to solve all the minor problems without any hurdle. Therefore, you may try this out with your fire alarm as well. To do so, follow the steps below:

  • Press the resetting button for almost 20 seconds and just wait for a few more seconds to test.
  • If your device is pretty old and doesn’t have any resetting button on it. Then you don’t have to worry at all as it may have it inside. Therefore, just unscrew the device and press it for 15 to 20 seconds for efficient results.
  • The digital ones may need a deactivation code. For that, you need to contact the manual support help before such an event. This will control the situation within a heartbeat.
  • If resetting doesn’t help you in any means, try flipping the circuit breaker button. This may help you get rid of the annoying beeping sound, but it’s a temporary hack, and it would happen again.

Remove Any Smoke Present Close To The Detector

Sometimes, your device may be perfectly fine. Still, there would be some external factors that may disrupt it to function properly. These factors include humidity and smoke, not from any fire. Smoke from the kitchen while you’re cooking or cigarette smoke may stimulate the smoke detector, which may beep continuously and create chaos around.

The only way to get rid of this beeping is to remove these external factors. Unfortunately, all you can do is open the windows or switch on the fan to create a passage for it.

Similar Articles

Conclusion

Fire alarms are pretty essential as they make alert people and save lives. However, they may sometimes malfunction and produce abnormal beeping sounds without any stimulus.

Keeping this in mind, we have discussed the most common causes behind such a mishap, along with all the hacks and precautions that you may follow to get rid of it in no time.

0 Shares

Leave a Comment

Your email address will not be published.

Scroll to Top
0 Shares
Share
Pin
Tweet