Types of blue flashing light on Ring doorbell
The Ring doorbell blinking blue light may indicate different things based on its pattern. Below are the types of blue flashing lights on Ring doorbells:
- Spinning blue light: The spinning blue light directs a regular doorbell push. It indicates that your doorbell conveys alerts and notifies you of possible calls.
- Solid blue light: The Ring doorbell solid blue light indicates that your doorbell speaker is on and someone is connected; hence you can listen or talk to them. In short, the spinning blue light means a call and answering that call will show solid blue light.
- Upward-moving blue light: The upward-moving blue light may indicate that your Ring device is trying to connect to the home network. Moreover, you usually see this during the set-up. However, if not, you may have a Wi-Fi connection problem.
- 4 blue lights flashing 4 times: The 4 blue lights flashing 4 times may indicate an unsuccessful set-up of your Ring doorbell. So, in such a case, you need to reset your system and repeat the set-up. Ensure that you follow the steps carefully.
- 1 second On & Off blue flashing light: The 1 second On & Off blue light indicates that your doorbell is starting or booting. However, if this continues for a long time, the Ring doorbell is probably stuck in a boot loop.
- Top half flashing blue: The Ring doorbell’s top half flashing blue light may occur in two ways. The problem may be a bad password if it occurs during a set-up. However, if it happens after set-up, your doorbell is connected to the power, hence charging.
- Rapid flashing blue light, then white: The series of fast flashing lights then turning it into white directs that your Ring device just completed a hard reset. So, you can now start setting it up, enabling you to use your Ring doorbell again.
Troubleshooting your Ring camera flashing blue
Follow the troubleshooting guide if your Ring flashing blue light without any apparent cause.
Here are the steps to troubleshoot your Ring camera blinking blue:
- Identify the cause behind your Ring doorbell flashing blue light. Each pattern specifies a particular reason.
- Next, check your Internet connection. If it’s not stable, place the router close to the system. You may also check the internet connection via the Ring app on your phone.
- Then reset or restart your Ring doorbell to clear out all the minor and major bugs.
- Lastly, if this troubleshooting reset doesn’t help you remove the flashing light, feel free to contact the customer support team for further assistance.
Below are the steps to reset your Ring doorbell to the default settings.
- Firstly, look for the set-up button of your Ring doorbell. It is on the back or right side and is orange or black. All these features depend upon the model of your doorbell.
- Next, press and hold the set-up button for at least 15 seconds.
- After 15 seconds, release the button. You’ll now see the light flashing for a few seconds on the front of your device, indicating your ring doorbell’s resetting process.
- Now after 5 minutes, your Nest doorbell will be reset to the default settings.
- Lastly, press the orange/black button again to put your doorbell in the set-up mode.
Frequently Ask Questions
Ring doorbell 2 flashing blue
If you recently got a Ring doorbell pro and its blinking blue LED with a slowly filling-in circle at the front of your doorbell, note that this blue circle at the front would be the charging meter.
Ring chime flashing blue light
When your Ring chime flashes the blue light, it clearly indicates it’s charging. The circle would slowly fill ups showing the increase in the battery life. However, the solid blue light means the system has been fully charged and will vanish when disconnected from the source.
Conclusion
In conclusion, note that your Ring doorbell may flash blue light in several ways, each type indicating a typical cause. For instance, the spinning light indicates the regular doorbell push, while the solid blue light indicates that your speaker is on. However, if there’s no apparent cause, then troubleshoot your system.
For more details, ride through this blog and learn about all the flashing blue lights of the Ring doorbell and an easy hack to resolve it.
Source:
https://support.ring.com/hc/en-us/articles/360048673232-Troubleshooting-Your-Ring-Chime-Pro-2nd-generation-and-Understanding-Light-Patterns
https://support.ring.com/hc/en-us/articles/360000176166-Blinking-Blue-Light-on-Ring-Video-Doorbell-Pro-After-Installation
