How to Change the Code on a Schlage Lock? [5 Easy Steps]

how to change the code on a schlage lock

What are the types of Schlage Keypad codes?

Before heading to the steps to change the Schlage code, it’s important first to know the types of these codes.

There are two Schlage Keypad codes: the four-digit user and six-digit programming codes.

1. User codes: four-digits

These codes are composed of 4-digits and are mainly responsible for unlocking the lock. You can easily find this code at the back of your keypad or on the User Manual.

Moreover, you can keep up to 19 4-digit codes, including the guest and the primary entry codes. However, note that this four-digit code should differ from the programming codes assigned to you.

2. Programming code: six-digits

This six-digit programming code doesn’t unlock the lock but instead puts the lock into the programming mode. Therefore, it’s essential to remember this code to program the lock.

You can find this code on the yellow label at the back of your keypad or on the User Manual.

So, to look at the back of your keypad, remove the keypad from the door of your Schlage.

How can you change the code on your Schlage keypad?

Here are the steps to change the 4 digit code on schlage lock:

1st Step: Look for the Programming code:

The first step to changing the code on your Schlage keypad is to look for the programming code. You can find it on the outer face of your keypad or in your User Manual. Note that you must take the keypad off the Schlage’s door for the former option.

In addition, if you have forgotten your previous entry code or the lock has been used, you’ll need to reset the keypad to its default settings.

2nd Step: Enter the Programming code:

After finding your programming code, the next step is to enter it on the keypad. This six-digit code will blink orange light thrice and produce a beeping sound thrice.

3rd Step: Press the number 1 and Schlage button at the same time

Next, press the number 1 and Schlage buttons simultaneously on your keypad. This will also make your Schlage button blink an orange light and produce a beeping sound thrice.

4th Step: Enter the new entry code

The next step is to enter the new entry code on your keypad. Again, this new code should be unique, not your guest or entry code. Also, it shouldn’t be from your programming code.

5th Step: Re-enter your new entry code for confirmation

Lastly, confirm your new entry code by re-entering it. Note that you’ll see a flash green light and hear a single beep sound to ensure everything is done accurately.

You may even test this new entry code for your satisfaction.

How to add another 4 digit user code on your Schlage lock?

The Guest codes on your Schlage lock are the temporary codes on your Schlage lock that you can share with your friends, family, and neighbors. You can easily delete this code later. Also, note that you can store up to 19 such user codes.

Here are the steps to add another 4-digit user code on your Schlage lock:

1st Step: Enter the 6-digit programming code

Firstly, enter the 6-digit programming code on your keypad. This will blink orange light thrice and will beep thrice too.

2nd Step: Press the Schlage button and then the 1 button

Now press the Schlage button and then the 1 button on the keypad. This will, make your Schlage button blink orange and beep thrice.

3rd Step: Enter the new 4-digit code

Next, enter the new 4-digit code, which you can remember easily. Again, ensure it is unique and not your primary or guest code. Also, it shouldn’t be part of your programming 6-digit code.

4th Step: Re-enter the new code for confirmation

Lastly, confirm this new 4-digit code by retyping it again. When the process is completed, you’ll see the Schlage button flash green light and one long beep sound.

In addition, you may test this new code for more confirmation as you add more than 1, up to 19 such codes. So, repeat the same steps as per need.

How to remove the 4-digit code on your Schlage lock?

As mentioned earlier, you can remove the existing 4-digit code you gave someone whenever you want.

Here are the steps to remove the 4-digit code on your Schlage lock:

1st Step: Enter the 6-digit programming code

Use the User Guide or look behind the keypad for your programming code to enter it on your keypad. Once done, you’ll see an orange light blinking thrice and hear three beeps.

2nd Step: Press the Schlage button and the number 2

Now press the Schlage button and then the number 2 on your keypad. This will blink the orange light thrice and then beep thrice.

3rd Step: Enter the unwanted code twice to delete it finally

Lastly, enter the unwanted code twice to delete it. Once the process is completed, you’ll see the Schlage button turn green and hear a long beep.

Furthermore, you may even test the user code to ensure the procedure has been completed successfully.

How can you enable the Vacation mode on the Schlage lock?

The Vacation mode helps you to disable all the user codes on the keypad, which will only make your primary code work.

Here are the steps to enable the Vacation mode on the Schlage lock:

  1. Firstly, enter the 6-digit programming code. This will make the Schlage button beep thrice and blink an orange light thrice.
  2. Now, press the Schlage button and then the number 4 button. This will make your lock flash green light and beep once.
  3. Your vacation mode will now be active in no time.

FAQs

How do I find my 4-digit verification code?

The 4-digit verification code is on the label on the programming guide along with the Schlage lock. Or you may remove the lock from the door and look for the label on the back of it.

Why am I not able to create a new user code?

Here are the reasons why you’re unable to create a new user code:

  1. You must already have 19 codes which is the limit
  2. The second code you entered would be different from the first one you entered
  3. The new code you entered would be similar to your programming code

How do I reset my 4-digit code?

Here are the steps to reset your 4-digit code:

  1. Firstly, press the Schlage button and number 1 at the same time.
  2. Now enter the new 4-digit code.
  3. Lastly, re-enter it for confirmation.

Conclusion

There are two types of codes on your Schlage lock, the four-digit, and the six-digit. The four-digit is the User code, while the six-digit one is the Programming code. You can easily change, add, or delete the 4-digit user code. Note that the limit for this code is up to 19, so you can enter 19 codes in your system.

Dive into this blog to learn the types of codes for your Schlage lock. Also, the steps to change and remove the 4-digit code. Also, you’ll find the steps to enable the Vacation code on your Schlage code.

Source:
https://www.wikihow.com/Change-Code-on-Schlage-Lock

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top